NEWS

Contact us

 Kaifeng Hyde Machinery Co., Ltd.

 Add: No.106, Jinming Road, Kaifeng City,

 Henan Province, 475000 China

 Tel: 0086-371-23863888

 Fax: 0086-371-23865326

 Mobile: 0086-15137822919

 E-mail: hdjxlyt@163.com

 Website: www.kfhdjx.com

The use and maintenance of seed selection machine

You are here: Home?>>?NEWS >> Industry News

The use and maintenance of seed selection machine

发布日期:2015-04-29 00:00 来源: 点击:

Multiple seed separator wide adaptability, by replacing the sieve, and adjust the air volume can be featured on the seeds of wheat, rice, maize, sorghum, bean, rape, forage and green manure. Use and maintenance of the machine is high, a little carelessness will affect the selection of quality. The use and maintenance of the machine are as follows.

1 Selection of the best in the indoor operation, the location of the machine to be flat, solid, parking location should be considered to facilitate the dust.

2 before the operation to check whether the parts of the connecting screw is tightened, the rotation of the drive parts is flexible, there are no exception, and the tension of the transmission belt is appropriate.

3 during the operation of the process of replacement, the machine must be left in the machine to remove the seeds, and the machine will continue to run for 5 ~ 10 minutes, while the front and rear air conditioning handle switch several times, to exclude the deposition in the first, in the interior of the remaining species and impurities. To confirm that no seed and impurities from a few stored in the indoor flow, the machine can be stopped, and the first sieve on the surface of the seeds and impurities will be cleaned to the row, and then remove the screen surface, clean the next screen.

4 if the conditions are limited, and must be in the outdoor operation, it should find a safe place to park the machine, and to be placed in the wind, to reduce the impact of wind on the selection effect. When wind speed is greater than 3, the installation of wind barrier should be considered.

5 before each operation should be carried out before the lubrication point, after the end should be cleaned and checked, and to timely troubleshooting.


相关标签:Seedmachine

  • 客户服务
code

Scan

Share
message
Please enter the message content in this。
name
Contacts
Phone
Landline
XML 地图 | Sitemap 地图